PrusaSlicer is a Free application provided by Prusa to slice and prepare 3D Files for 3D Printing.
- Using your web browser, navigate to the following Web page: https://www.prusa3d.com/drivers/
- Click “Download” under Drivers & Apps to download the latest version of PrusaSlicer
- Once the application has been downloaded, run and install PrusaSlicer.
- Once the application has been installed, launch PrusaSlicer. You will be greeted by the Configuration Wizard
- On the configuration wizard, select NEXT
- On the Prusa FFF Technology Printers screen, scroll down to the MK3 Family of printers and under the Original Prusa i3 MK3S & MK3S+ make sure the 0.4mm nozzle checkbox is checked, then select FINISH.
- Make sure no other printers are selected or they will be added and could cause slicing issues. Currently, the Technology Commons only supports the i3 MK3S printer from Prusa.
- Make sure no other printers are selected or they will be added and could cause slicing issues. Currently, the Technology Commons only supports the i3 MK3S printer from Prusa.
- You should now have a virtual i3 MK3S build plate.